640 Poyner Dr. Longwood, FL 32750
888.493.8041 XP MOTORSPORTS Serving the Motorsports Industry for over 16 years World Wide 4/26/20

FREE SHIPPING ON EVERYTHING IN OUR STORE NOW TILL MAY 31, 200
USE "SHIP" AT CHECKOUT AND PLACE IN THE "APPLY COUPON" BOX AT CHECKOUT

Motul RBF660
$28.95
Free shipping

Motul RBF600
$19.50
Free shipping

BREMBO LCF 600
$19.95
Free Shipping

BREMBO HTC 64T
$36.00
Free Shipping

BREMBO CALIPER TEMPERATURE STICKERS
$36.65
Free Shipping

Brembo Rotor Temperature Paint
Green: 430C/806F
Orange: 560C/1040F
Red: 610C/1130F
$129.58
Free Shipping

Girodisc designs and manufactures some of the highest quality brake components on the market, specializing in direct replacement two-piece brake rotors. Our products are all engineered and machined in our facility in Bellingham, WA from strictly US sourced materials. We take quality seriously and that starts with using only the best raw materials.
The primary purpose of a Girodisc rotor is to increase the ventilation and cooling capacity of the brake disc while retaining its original dimensions. The secondary purpose is to reduce unsprung and overall vehicle weight. This is accomplished by using two-piece disc construction. Thirdly, Girodisc rotors are a full floating design giving the driver better pedal feel and modulation. This gives more confidence and leads to lower lap times.
Any type of design aesthetic is possible with regard to hat geometry, color and rotor slot pattern.
XP Motorsports/Girodisc do not recommend cross drilled discs for high performance applications.

***Girodisc manufactures replacement rotors and hats for most manufactures including***
Alfa Romero, Audi, BMW, Cadillac. Chevrolet, Dodge, Ferrari, Ford, Honda, Lamborghini, Lotus, McLaren, Mercedes, Mitsubishi, Nissan, Porsche, Subaru, and Volkswagen

Need new rings for your Brembo or Stoptech big brake kit? We've got you covered, these are 100% plug and play with your existing hats using 355mm x 32mm rotors or 332mm x 32mm
The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes 48 curved vanes, developed in racing to act as a centrifugal pump to force cooling air through the disc.

The Brembo High Performance (HP) Program is the direct result of winning over 200+ World Championships and decades of designing brake systems for the worlds top supercar manufacturers.
Brembo Dominates Motorsports: Formula 1, World Rally Championship (WRC), NASCAR, Indy Racing League (IRL), IMSA, SRO World Challenge, and FIA GT Championship.
Brembo supplies over 30 automotive manufacturers including Acura, Aston Martin, Audi, BMW, Cadillac, Chrysler, Dodge, Ferrari, Ford, General Motors (GM), Honda, Infiniti, Jaguar, Jeep, Lamborghini, Land Rover, Lexus, Maserati, Mercedes-Benz, Mitsubishi, Nissan, Porsche, and Subaru.
BREMBO BRAKE PADS
Brembo provides a number of performance pads for both the OEM and GT calipers they manufacture. So if you street drive and need pads for your daily commute, you do HPDE events, or you need racing pads. Brembo and XP Motorsports have the brake pads you'll need for your application. Below are just some of the pads available for your Brembo Brakes either OEM or the GT system

PFP TS20 Compound*, Semi-Metallic Dual purpose (Street & Track) compound. **Chamfered edges**. **Shims Included**
*Available for All Brembo Calipers

PFP RS35 Compound*, Semi-Metallic race compound for competition use only.
*Available for All Brembo Calipers

PFP RS60 Compound*, Semi-Metallic race compound for competition use only.
*Available for Brembo Calipers M,N,P,B,H,J

PFP RA70 Compound*, Endurance/Advanced Sprint race compound for competition use only.
*Available for Brembo Calipers M,N,L,P,G,B,H,J

PFP RA01 Compound* Low Steel endurance race compound for competition use only.
*Available for Brembo Calipers M

PFP RE10 Compound, Endurance race compound for competition use only.
*Available for Brembo Calipers M,N,P,A,C,F,Lotus,B,H,J

PFP DV01 Compound, Low Steel endurance race compound for competition use only.
*Available for Brembo Calipers B,H,P,A,C,F,Lotus

XP Motorsports and JRZ Suspension have been working together for several years on up fitting and improving the suspension and handling of European, Asian, and American Muscle Sports cars. Now and until the end of April we are offering FREE Springs on all full sets of JRZ Dampers ordered online at https://www.xpmotorsports.com or call our toll free number @ 888.493.8041 to talk to one of our knowledgeable techs to place the order.
The JRZ damper design comes from 60 years of experience in Research and Development of suspension and damper design for racing, rally, off road, HEAVY-DUTY and industrial applications. The approach of the JRZ design philosophy is completely different from other damper manufacturers:
“Emphasis is on controlling the un-sprung mass” and Control of sprung mass
The Results
Improved handling
Reduced tire wear
More traction
Better comfort level
Better stability of vehicle body
Increased lifetime of damper
JRZ makes dampers for the following vehicles

During these difficult times XP Motorsports has also partnered with “SEZZLE” and “Klarna” so you can get the parts you need now and take time to pay for them. Sezzle allows you to purchase what you need and make 4 easy payments over 6 months interest free. Klarna offer financing options like no interest 6 months, 30 days same as cash, up to 36 month on your purchases. Choose your choice of payment at checkout.
Visit us NOW and have your parts ready for when the tracks open back up. XP Motorsports can install all of your performance parts and maintain your precious girl at her peak performance.

Questions? No Problem our staff is here and can answer all your questions.
SO CALL US WE ARE HERE TO ANSWER YOUR QUESTIONS
888.493.8041
or visit us @ www.xpmotorsports.com
XP Motorsports can install all of your performance parts and maintain your precious girl at her peak performance.

Members: SEMA, PRI, IMSA, SCCA, NASA, Chin Motorsports